2011  

Solar Power International 2011 in Dallas
Intego will be part of the German Pavilion at  the Solar Power International from October 17th to 20th 2010 in Dallas (USA). For further information of the conference see http://www.solarpowerinternational.com.

26th EUPVSEC in Hamburg
Intego exhibits at the 26. European Photovoltaic Solar Energy Conference and Exhibition from September 5th to September 8th in Hamburg. For further information see http://www.photovoltaic-conference.com/.

Intersolar 2011 in Stuttgart
For the first time Intego will be exhibitor at the Intersolar from June 8th to 10th in Munich. For further information see http://www.intersolar.de/.

2010     

Solar Power International 2010 in Los Angeles
Visit us at the Solar Power International from October 12th to 14th 2010 in los Angeles (USA). For further information of the conference see http://www.solarpowerinternational.com.

25th EUPVSEC in Valencia
Visit us at the 25. European Photovoltaic Solar Energy Conference and Exhibition from September 6th to September 9th in Valencia. For further information see http://www.photovoltaic-conference.com/.

Photovoltaic Technology Show 2010 in Stuttgart
Visit us at the 5. Photovoltaic Technology Show Europe from April 27th to April 29th in Stuttgart. For further information see http://www.photon-expo.com/.

2009

Solar Power International 2009 in Anaheim
Visit us at the Solar Power International from October 27th to 29th 2009 at the Moscone Center in San Francisco (USA). For further information of the conference see http://www.solarpowerinternational.com.

24th EUPVSEC 2009 in Hamburg
Visit us at the 24th European Photovoltaic Solar Energy Conference and Exhibition from September 21st to 24th 2009 at the International Fair in Hamburg. For further information of the conference see http://www.photovoltaic-conference.com/.

Photovoltaic Technology Show 2009 in Munich
Visit us at the 4th Photovoltaic Technology Show Europe from March 4th to 6th 2009 at the ICM Munich. We show you live our vision system for IR-block inspection including a 3D geometry measurement as well as our inline ARC layer thickness measurement system. For further information of the conference see http://www.photon-expo.com/.

2008

Fakuma 2008
Visit us at our stand 2320 in hall A2 from October 14th to 18th in Friedrichshafen. There you can see our demonstration system for transparent micro titer plates and convince yourself of the capabilities of our camera inspection systems. We would be pleased to meet you!

23th  EUPVSEC 2008 in Valencia
Intego will be present again at the 23nd European Photovoltaic Solar Energy Conference and Exhibition from September 1st to 5th in Valencia. There you can see live some of our current inspection systems for the solar technology. For further information of the conference and exhibition see http://www.photovoltaic-conference.com/.

Relocation in Week 25 with Change of Phone Number
Between June 16th und 20th we will move in our new Intego building:
Henri-Dunant-Str. 8
91058 Erlangen
Tel   +49 9131 61082-0
Fax  +49 9131 61082-999
During that time you can reach us under the old and new phone number. From June 23rd we are available for you via the new phone number.

2007

"Topping-Out" Ceremony of our New Intego Building
Only 3 month after laying the foundation stone we have celebrated the topping-out ceremony on January 8th 2008. The new building will have a total production and office area of 1.600 sqm. The move-in is scheduled in June 2008.

Photovoltaic Technology Show 2008 in Munich
Visit us at the Photovoltaic Technology Show from April 2nd to 4th 2008 in Munich subsequent to the 6th Solar Silicon conference at the ICM Munich. We show you live our vision systems for IR-block inspection including a geometry measurement as well as our microcrack detection of wafers. For further information of the conference see http://www.photon-expo.com/

New Business Unit "Solar Production"
Intego develops and manufactures camera inspection systems adapted to the special inspection needs of solar production. Our solutions range from systems for single solar cells to systems for complete moduls. Are you interested, then contact us or read our Infoseite.

22nd EUPVSEC 2007 in Milano
Intego will be present at the 22nd European Photovoltaic Solar Energy Conference and Exhibition from September 3rd to 7th in Milano with an own stand. There you can see live some of our inspection systems for the solar technology. For further information see http://www.photovoltaic-conference.com/.

22nd Symposium Photovoltaic Solar Energy form March 7th to 9th at Kloster Banz
Intego shows in the parallel exhibition two new inspection systems. The "ARC inspection" measures two-dimesionally on the wafers the thickness of the anti-reflective-coating and the coloring (hue). The "print inspection" checks the printed electric contacts and the cell geometry. Further informations and registration at http://www.otti.de/.

OTTI-Seminar "Industrielle Bildverarbeitung"
Intego will be present with a contribution to the subject-matter camera inspection in the plastics indus-try: from transparent parts to decorated three dimensional surfaces at the seminar of the OTTI-Kolleg in Regensburg at 31. January 2007 and 01. February 2007. Further informations and registration at http://www.otti.de/.KI-Lüdenscheid Seminar "Folien Hinterspritzen"
Intego will be present with a contribution to the subject-matter automatic quality control for IMD-parts at the seminar "Folien Hinterspritzen" of the Kunststoff-Institut Lüdenscheid at 15. November 2006 in Lüdenscheid. Further informations and registration at http://www.kunststoff-institut.de/.

2006

Demag Open House 2006 in Spain at Barcelona
There we show at 15. and 16. November 2006 together with our partners, the companies Demag and Kist Maschinenbau, a complete fully automatic production cell for IMD-moulded automotive blinds. After moulding and cleaning, the blinds are inspected with our 100%-inspection system for typical surface faults and sorted afterwards.

Fakuma 2006
Microtiter plates are used in pharmaceutical screenings and hence must be of faultfree quality. We show at our stand A2/2320 a 100%-inspection system for typical faults (scratches, inclusions, streaks, ...) at the bottom of the transparent wells as well as defects in the support frame and the assembly.

Fakuma 2006
We show another inspection system for IMD-moulded decorative blinds for automobiles for typical surface faults at the stand B1/7104 of the Demag company. The inspection system ist there integrated in a complete automatic production cell.

Demag Open House 2006
Read the article [German] "Betonung auf System" of the Demag Open House 2006 in the edition 07/2006 of the journal Kunststoffe and find out, how we provide felicitous solutions for the plastics industry together with our partners. This was there impressively demonstrated with the example of a fully automatic production cell für mobile phone displays in IMD-technology with cleaning and inspection.

VDI-Convention "Medizintechnik"
Intego was present with a contribution to the subject-matter camera inspection systems in the medical technology at the VDI-Convention "Kunststoffe in der Medizintechnik 2006" from 26. to 27. April 2006 in Friedrichshafen. You will find the manuscript also in VDI-Kunststoffband 4275 "Kunststoffe in der Medizintechnik 2006" on pages 65-75.

DIF-Seminar "Medical Technology"
Intego will be present with a contribution to the subject-matter automatic 100%-camera inspection in the medical technology at the seminar "Kunststoffe in der Medizintechnik" of the Deutsches Industrieforum für Technologie at 06. and 07. July 2006 in Würzburg. Further informations and registration at http://www.dif.de.

VDI-Convention "Medizintechnik"
Intego will be present with a contribution to the subject-matter camera inspection systems in the medi-cal technology at the VDI-Convention "Kunststoffe in der Medizintechnik 2006" from 26. to 27. April 2006 in Friedrichshafen. Further informations and registration at http://www.vdi.de/medizintechnik2006.

2005

Quick and Reliable Inspection of Lacquered Plastic Parts
Read the article of the manufacturer J + D Bode GmbH in the edition 20/2005 of the journal "besser lackieren!" and find out how to reach a reliable quality by automating the 100% final inspection. Additionally, this saves inspection costs and reduces error rates in the lacquering process.

Fakuma 2005 - Review
Many thanks for the great resonance at our stand at the Fakuma 2005 in Friedrichshafen. There you could convince yourselves live at our demonstration systems for high-gloss surfaces and large transparent parts  of the capabilities of our camera inspection systems. We thank you for your interest and your numerous visits!

Fakuma 2005
Visit us at our stand 2320 in hall A2 from October 18th to 22nd in Friedrichshafen. There you can see our demonstration systems for high-gloss surfaces and large transparent parts and convince yourself of the capabilities of our camera inspection systems. We would be pleased to meet you!

Congress Zulieferer Innovativ 2005
Visit us at the Customer Center of the Audi Forum on July 6th. There you can see one of our demon-stration systems and convince yourself of the capabilities of our camera inspection systems. We would be pleased to meet you!

High Additional Benefits
Read our article in the January edition of the "Plastverarbeiter" and find out interesting facts about the application and cost savings of modular image processing systems. Realize the contained benefits therein!

Web Relaunch of the Intego Web Site
Ready for the new year, the Intego Web-Site presents itself in a new design. In addition to a fresher and more dynamical look there are updated and revised contents waiting for you.